Main About John Deal Coatings JDC Products JDC Technology ISO Information JDC Contact Information

Adhesives Technology
Release Liner Technologies
Lab Capabilities
Coating Technology
Finishing Technology



Adhesives Technology


Solvent Acrylic Pressure Sensitive Adhesives

  • Low VOC
  • High Peel/Tack
  • Permanent
  • Low and Medium Peel/Tack Repositionable and Removable
  • High Temperature
  • Optically Clear
  • Low Out Gassing/Chemically Clean
  • Skin Contact
  • Hybrid Acrylic / Rubber Chemistry

Emulsion Acrylic and Rubber Pressure Sensitive Adhesives

  • General Purpose
  • HSE & LSE Surface
  • Foam Bonding

Solvent Rubber Base Pressure Sensitive Adhesives

  • Excellent Adhesion to Polyolefin Plastics
  • High Bond Strength
  • High Performance Industrial Applications

Heat Activated Adhesives

  • Specialty Bonding Applications


Release Liner Technologies

Paper, Polyester and Polypropylene Liners

  • Super-Calendared Kraft – Silicone Coated One or Two Sides
  • Kraft Paper Board –Silicone Coated One or Two Sides
  • Clay Coated One or Two Sided
  • Poly Coated One or Two Sided
  • Film Liners Polyester – Several Gauges, One and Two-Side Silicone Coated
  • Biaxially Oriented Polypropylene
  • High Density Polyethylene

Silicone Release Chemistries

  • Easy to Tight Release Ranges
  • UV, Platinum, Rhodium, Fluorosilicone , Tin
  • Non-Silicone PET Film Liner

Lab Capabilities


Prototype Samples

  • Most Lab Made Sheet Sample Prototypes Can Ship Within 24 Hrs
  • Plant Trial Runs On Production Equipment
  • Usually a 1-2 Week Turnaround

Lab Testing Of Pressure Sensitive Adhesives (PSTC Testing Standards)

  • Peel Adhesions
  • Static Shear and Dynamic Shear
  • Release (Variable angles and speed)
  • Tensile Strength & Elongation
  • Elevated Temperature Shear

Out-Sourced Lab Testing

  • Chemical Cleanliness Testing of Adhesives
  • Dynamic Headspace Out Gas Testing
  • Extractable Silicone By FTIR
  • Ion Chromatography
  • Sound & Vibration Damping
  • Moisture Vapor Transmission Rate

Out-Sourced Certification Testing

  • UL Testing Certification Testing
  • Automotive Specifications Certification

Coating Technology


Reverse Roll and Pattern Coating Technology

  • Solvent and Water Base PSA Coating/Laminating Line with integrated Converting Management System
  • Maximum Web Width 62-inches
  • Minimum Web Width 24-inches
  • Minimum Roll Face Width 64-inches
  • 3-Zone Temperature Control (ambient to 325 degrees Fahrenheit)
  • Maximum Roll Diameters (40 – 42 inch diameter)
  • Core ID's : 3 & 6-inches
  • Corona Treatment-Primary and Secondary stations
  • NDC Infrared Engineering Coatweight Control Systems
  • LEL Controls
  • Electro-Mechanical Automatic Web Guiding System
  • Process Heaters (Infrared)
  • Web Cleaner Systems
  • Process Management Software
  • Moisture Control
  • Thermal Oxidization
  • Static Control
  • Vacuum Roll Tension Management System
  • Oven Dryer Filtration Systems
  • Coating Pattern


Finishing Technology


Slitter and Duplex surface

  • Center and constant minimum gap rewinder with programmed single differential rewind tension controls
  • Fully integrated program logic controlled web management system
  • Integrated vacuum splice table for consistent butt and angular splice options
  • Integrated shear and score cut knife systems
    • 40-inch Maximum Rewind O.D.
    • 61-inch Maximum Rewind Slit Width
    • 40-inch Maximum Unwind O.D.
    • 4-inch Minimum Shear Blade Slit Width (+-1/16)
    • Core ID's : 3 & 6-inches

Packaging Capabilities

  • Box Packaging
  • Suspend Packaging
  • Vertical Skid Packaging
  • Horizontal Skid Packaging
  • Material Labeling options - blind & custom


www.jdcinc.com

Copyright © 2009 JDC Coatings Inc.
Revised 02/23/2009 14:18 CST